From: Wolfgang Denk Date: Mon, 13 Jan 2014 14:48:39 +0100 Subject: [U-Boot] [PATCH] powerpc:Rename CONFIG_PBLRCW_CONFIG & CONFIG_SYS_FSL_PBL_PBI In-Reply-To: <52D37CF5.2090100@freescale.com> References: <1389587917-10324-1-git-send-email-prabhakar@freescale.com> <20140113053254.D9DF83821EB@gemini.denx.de> <52D37CF5.2090100@freescale.com> Message-ID: <20140113134839.D2ECC3821F4@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Prabhakar, In message <52D37CF5.2090100@freescale.com> you wrote: > > > What is the reason for the reenaming? Especially, why changing from > > CONFIG_ to CONFIG_SYS_ ? > > CONFIG_PBLRCW_CONFIG has 2 CONFIG. it is slightly confusing. > > Reason for moving CONFIG_ to CONFIG_SYS: These defines enables of > adding RCW(power on reset configuration) and > PBI(pre boot loader commands) in u-boot image. These information will be > used by SoC hardware for NAND, SD, SPI boot. > As these configuration will be used by SoC hardware. I thought of adding > CONFIG_SYS. CONFIG_ means stuff that can be freely adjusted by the end user to match his likings, like adding one command and removing another. CONFIG_SYS_ means stuff that is determined by the hardware configuration, i. e. that has to be adjusted according to specific properties to make U-Boot working on some hardware, and which can (or should) not be "adjusted" by the end user. I don;t understand your intentions enough to say which applies here; IIRC at least PBI might be more of the CONFIG_ type. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de How many hardware guys does it take to change a light bulb? "Well the diagnostics say it's fine buddy, so it's a software problem."