From: "matson" Subject: Re: additional model for sata_sil Mod15Write list Date: Thu, 30 Jan 2014 03:24:15 +0000 Message-ID: <201401300324.s0U3OFFs006205@rs101.luxsci.com> Reply-To: lists-matsonpa@luxsci.me Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from rs101.luxsci.com ([74.205.104.180]:36213 "EHLO rs101.luxsci.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750879AbaA3DaR convert rfc822-to-8bit (ORCPT ); Wed, 29 Jan 2014 22:30:17 -0500 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org, tj@kernel.org Tejun Heo: > Matson, can you please post the results of dd tries with varying io s= izes=A0 > from your previous email? Those were numbers off the top of my head. =A0Here are real results: dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D7680 Never caused a problem. =A0I tried count as high as 100000. dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D1 Caused timeout one time in one hundred trials. dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D2 Caused timeout one time in one hundred trials. dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D4 Caused timeout four times in one hundred trials. dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D8 Caused timeout four times in one hundred trials. dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D16 Caused timeout nine times in one hundred trials. dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D32 Caused timeout fourteen times in fifty trials. dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D64 Caused timeout thirteen times in twenty-five trials. (Nine runs with one 30s timeout; two runs with 60 seconds of timeouts.) dd oflag=3Ddirect if=3D/dev/zero of=3D/dev/sdb bs=3D8192 count=3D128 Caused timeout seventeen times in ten trials. (Two runs with one 30s timeout; one run with 60 seconds of timeouts; three runs with 90 seconds of timeouts; one run with 120 seconds of tim= eouts.) dd oflag=3Ddirect of=3D/dev/sdb if=3D/dev/zero count=3D1 bs=3D16k Caused timeout zero times in one hundred trials. dd oflag=3Ddirect of=3D/dev/sdb if=3D/dev/zero count=3D1 bs=3D32k Caused timeout six times in fifty trials. dd oflag=3Ddirect of=3D/dev/sdb if=3D/dev/zero count=3D1 bs=3D64k Caused timeout three times in fifty trials. dd oflag=3Ddirect of=3D/dev/sdb if=3D/dev/zero count=3D1 bs=3D128k Caused timeout five times in fifty trials. dd oflag=3Ddirect of=3D/dev/sdb if=3D/dev/zero count=3D1 bs=3D256k Caused timeout eight times in fifty trials. (Six runs with one 30s timeout; one run with 60 seconds of timeouts.) dd oflag=3Ddirect of=3D/dev/sdb if=3D/dev/zero count=3D1 bs=3D512k Caused timeout sixteen times in twenty-five trials. (Three runs with one 30s timeout; two runs with 60 seconds of timeouts; three runs with 90 seconds of timeouts.) dd oflag=3Ddirect of=3D/dev/sdb if=3D/dev/zero count=3D1 bs=3D1024k Yielded somewhat different information in dmesg: ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata9.00: failed command: WRITE DMA EXT ata9.00: cmd 35/00:00:00:00:00/00:04:00:00:00/e0 tag 0 dma 524288 out =A0 =A0 =A0 =A0 =A0res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (t= imeout) ata9.00: status: { DRDY } ata9: hard resetting link ata0: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata9.00: configured for UDMA/33 ata9.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] Result: hostbyte=3DDID_OK driverbyte=3DDRIVER_SENSE sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense discriptors (in hex): =A0 =A0 =A0 =A0 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 =A0 =A0 =A0 =A0 00 00 00 00 sd 8:0:0:0: [sdb] Add. Sense: No additional sense information sd 8:0:0:0: [sdb] CDB: Write(10): 2a 00 00 00 00 00 00 04 00 00 end_request: I/O error, dev sdb, sector 0 ata9: EH complete >> My HDD is HP part 625239, firmware is MH000C. =A0I do know whether > =A0 > I suppose you meant to write "do not know"? You are correct, I mistyped. =A0I have only this one drive, and I do _n= ot_ know=A0 whether other models or firmwares have this problem. Mine is dated 22N= OV2011. > Can you please post the output "hdparm -I" on your device? here it is: /dev/sdb: ATA device, with non-removable media Model Number: =A0 =A0 =A0 TOSHIBA MK2561GSYN =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 =A0 Serial Number: =A0 =A0 =A0Y1MGP3F0T Firmware Revision: =A0MH000C =A0 Transport: =A0 =A0 =A0 =A0 =A0Serial, ATA8-AST, SATA 1.0a, SATA II Ext= ensions,=20 SATA Rev 2.5, SATA Rev 2.6 Standards: Supported: 8 7 6 5=A0 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: =A0 16514064 LBA =A0 =A0user addressable sectors: =A0268435455 LBA48 =A0user addressable sectors: =A0488397168 Logical =A0Sector size: =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 512 bytes Physical Sector size: =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 512 bytes device size with M =3D 1024*1024: =A0 =A0 =A0238475 MBytes device size with M =3D 1000*1000: =A0 =A0 =A0250059 MBytes (250 GB) cache/buffer size =A0=3D 16384 KBytes Form Factor: 2.5 inch Nominal Media Rotation Rate: 7200 Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max =3D 16 Current =3D 16 Advanced power management level: 128 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4= =20 *udma5=A0 =A0 =A0 Cycle time: min=3D120ns recommended=3D120ns PIO: pio0 pio1 pio2 pio3 pio4=A0 =A0 =A0 Cycle time: no flow control=3D120ns =A0IORDY flow control=3D1= 20ns Commands/features: Enabled Supported: =A0 * SMART feature set =A0 =A0 Security Mode feature set =A0 * Power Management feature set =A0 * Write cache =A0 * Look-ahead =A0 * WRITE_BUFFER command =A0 * READ_BUFFER command =A0 * NOP cmd =A0 * DOWNLOAD_MICROCODE =A0 * Advanced Power Management feature set =A0 * 48-bit Address feature set =A0 * Device Configuration Overlay feature set =A0 * Mandatory FLUSH_CACHE =A0 * FLUSH_CACHE_EXT =A0 * SMART error logging =A0 * SMART self-test =A0 * General Purpose Logging feature set =A0 * 64-bit World wide name =A0 * IDLE_IMMEDIATE with UNLOAD =A0 * WRITE_UNCORRECTABLE_EXT command =A0 * {READ,WRITE}_DMA_EXT_GPL commands =A0 * Segmented DOWNLOAD_MICROCODE =A0 * Gen1 signaling speed (1.5Gb/s) =A0 * Gen2 signaling speed (3.0Gb/s) =A0 * Native Command Queueing (NCQ) =A0 * Phy event counters =A0 * Idle-Unload when NCQ is active =A0 =A0 DMA Setup Auto-Activate optimization =A0 =A0 Device-initiated interface power management =A0 * Software settings preservation =A0 * SMART Command Transport (SCT) feature set =A0 * SCT Read/Write Long (AC1), obsolete =A0 * SCT Write Same (AC2) =A0 * SCT Error Recovery Control (AC3) =A0 * SCT Features Control (AC4) =A0 * SCT Data Tables (AC5) Security:=A0 Master password revision code =3D 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 54min for SECURITY ERASE UNIT. 54min for ENHANCED SECURITY ERASE UNIT.= =A0 Logical Unit WWN Device Identifier: 50000393a290a53e NAA : 5 IEEE OUI : 000039 Unique ID : 3a290a53e Checksum: correct