From: Wolfgang Denk Date: Sun, 09 Feb 2014 12:13:28 +0100 Subject: [U-Boot] [PATCH] ARM: atmel: add sama5d3 Xplained board support In-Reply-To: <1391932359-23520-1-git-send-email-voice.shen@atmel.com> References: <1391932359-23520-1-git-send-email-voice.shen@atmel.com> Message-ID: <20140209111328.A272D380ECC@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Bo Shen, In message <1391932359-23520-1-git-send-email-voice.shen@atmel.com> you wrote: > Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC. > Now it supports boot from NAND flash and SD/MMC card. > Features support: > - NAND flash > - SD/MMC card > - Two USB hosts > - Ethernet (one GMAC, one EMAC) > > Signed-off-by: Bo Shen > --- > > board/atmel/sama5d3_xplained/Makefile | 15 ++ > board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++++ > boards.cfg | 2 + > include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++++++ > 4 files changed, 350 insertions(+) > create mode 100644 board/atmel/sama5d3_xplained/Makefile > create mode 100644 board/atmel/sama5d3_xplained/sama5d3_xplained.c > create mode 100644 include/configs/sama5d3_xplained.h Can we please stop using the SoC name in the board config name? The board name is just that: the name of the board. Please rename all sama5d3_xplained => xplained Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Parkinson's Law: Work expands to fill the time alloted it.