From: broonie@kernel.org (Mark Brown) Date: Wed, 12 Feb 2014 17:12:46 +0000 Subject: [PATCH 3/3] mfd: axp20x: Add bindings documentation In-Reply-To: <1391875428-6281-4-git-send-email-carlo@caione.org> References: <1391875428-6281-1-git-send-email-carlo@caione.org> <1391875428-6281-4-git-send-email-carlo@caione.org> Message-ID: <20140212171246.GG28112@sirena.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Feb 08, 2014 at 05:03:48PM +0100, Carlo Caione wrote: > Bindings documentation for the axp20x driver. In this file also two > sub-nodes (PEK and regulators) are documented. You probably want to CC bindings to the maintianers for the relevant subsystes too. > + - dcdc-freq : defines the work frequency of DC-DC where > + F=(1+dcdc-freq*5%)*1.5MHz It sees a bit nicer to either have this be the frequency and work back to the register setting or name it after the register field that gets updated as a result. I'm also not sure what *5% means - I'm guessing it's *0.05 but it'd be clearer to just write that. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: