From: peter.chen@freescale.com (Peter Chen) Date: Fri, 21 Feb 2014 17:05:46 +0800 Subject: [PATCH v10 01/15] usb: doc: phy-mxs: Add more compatible strings In-Reply-To: <53072081.2000407@pengutronix.de> References: <1392873284-9386-1-git-send-email-peter.chen@freescale.com> <1392873284-9386-2-git-send-email-peter.chen@freescale.com> <20140221091345.GA7541@e106331-lin.cambridge.arm.com> <5e4d795b507a4ea7b9faa69dd05148c4@BL2PR03MB226.namprd03.prod.outlook.com> <53072081.2000407@pengutronix.de> Message-ID: <20140221090544.GC13483@shlinux1.ap.freescale.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Feb 21, 2014 at 10:46:41AM +0100, Marc Kleine-Budde wrote: > On 02/21/2014 10:40 AM, Peter Chen wrote: > > > >>> > >>> Required properties: > >>> -- compatible: Should be "fsl,imx23-usbphy" > >>> +- compatible: "fsl,imx23-usbphy" for imx23 and imx28, "fsl,imx6q- > >> usbphy" > >>> + for imx6dq and imx6dl, "fsl,imx6sl-usbphy" for imx6sl > >> > >> Minor nit, but could we restructure this as something like the following, > >> with each string on a new line: > >> > >> - compatible: should contain: > >> * "fsl,imx23-usbphy" for imx23 and imx28 > >> * "fsl,imx6q-usbphy" for imx6dq and imx6dl > >> * "fsl,imx6sl-usbphy" for imx6sl > >> > >> It makes it a bit easier to read. > > > > Thanks, will change like above. > > > >> > >> I see the existing "fsl,imx23-usbphy" is used as a fallback for > >> "fsl,imx28-usbphy", "fsl,imx6q-usbphy", and "fsl,imx6sl-usbphy" in > >> existing DTs. > >> > >> Is this expected going forward? It might be worth mentioning. > >> > > > > These SoCs used the same FSL imx PHY, but different versions. > > imx23/imx28 are the first version, more improvements are at > > later SoCs (like imx6x) version. Keep "fsl,imx23-usbphy" at > > imx6 dts will be user know it is from imx23's. If you think > > it does not need, I can delete "fsl,imx23-usbphy" from imx6 dts. > > You should go after compatibility here. List (all) phys that are > comaptible, start with most specific end with most generic. > > Marc > Then, I should keep imx6 dts unchanging. Then, what I need to mention at this binding doc? -- Best Regards, Peter Chen