From: Tom Rini Date: Fri, 21 Feb 2014 14:15:25 -0500 Subject: [U-Boot] [U-Boot, v4, 1/1] Initial support for Silica Pengwyn board In-Reply-To: <1391186054-29627-2-git-send-email-lothar.felten@gmail.com> References: <1391186054-29627-2-git-send-email-lothar.felten@gmail.com> Message-ID: <20140221191525.GH16805@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jan 31, 2014 at 05:34:14PM +0100, Lothar Felten wrote: > This patch add support for the Silica Pengwyn board [1] > The board is based on a TI AM3354 CPU [2] > All jumpers removed it will boot from the SDcard, the console is on > UART1 accessible via the FDTI -> USB. The on board NAND flash is > supported and can act as boot medium, depending on jumper settings. > USB Host, USB Device and Ethernet are also provided but untested. > > [1] > http://www.silica.com/product/silica-pengwyn-board.html > [2] > http://www.ti.com/product/am3354 > > Signed-off-by: Lothar Felten Applied to u-boot-ti/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: