From: jason@lakedaemon.net (Jason Cooper) Date: Sat, 22 Feb 2014 17:16:19 -0500 Subject: [PATCH v4 00/22] Move DT kirkwood into mach-mvebu In-Reply-To: <1393096504-11844-1-git-send-email-andrew@lunn.ch> References: <1393096504-11844-1-git-send-email-andrew@lunn.ch> Message-ID: <20140222221619.GL7862@titan.lakedaemon.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Andrew, I've tentatively pulled this in as detailed below. The only outlier is an Ack from rmk on one patch. On Sat, Feb 22, 2014 at 08:14:42PM +0100, Andrew Lunn wrote: > The process of making most kirkwood boards boot using DT is nearly > complete. We can now move these boards into mach-mvebu, freeing them > of the legacy code needed for none-DT systems. At the same time, they > can become part of ARCH_MULTI_V5. > ... > Andrew Lunn (22): > ARM: Kirkwood: Give pm.c its own header file. applied to mvebu/soc-kw > irqchip: Orion: Fix getting generic chip pointer. in mvebu/irqchip-fixes and already taken by tglx > ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT > ARM: Kirkwood: Drop printing the SoC type and revision > ARM: Kirkwood: Seperate board-dt from common and pcie code. > ARM: Kirkwood: ioremap the cpu_config register before using it. > ARM: Kirkwood: ioremap memory control register > ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs > ARM: Orion: Move cache-feroceon-l2.h out of plat-orion applied to mvebu/soc-kw > ARM: MM: Add DT binding for Feroceon L2 cache applied to mvebu/soc-kw (needs Ack from rmk) > ARM: Kirkwood: Instantiate L2 cache from DT. applied to mvebu/dt > ARM: Fix default CPU selection for ARCH_MULTI_V5 applied to mvebu/soc-kw > ARM: Fix MULTI_TLB for feroceon for rmk's patch tracker > ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU > ARM: Move kirkwood DT boards into mach-mvebu > ARM: MVEBU: Let kirkwood use the system controller for restart applied to mvebu/soc-kw > ARM: MVEBU: Instantiate system controller in kirkwood.dtsi applied to mvebu/dt > drivers: Enable building of Kirkwood drivers for mach-mvebu applied to mvebu/drivers > ARM: MVEBU: Enable mvebu-soc-id on Kirkwood applied to mvebu/soc-kw > ARM: config: Add a multi_v5_defconfig applied to mvebu/defconfig > ARM: MVEBU: Simplifiy headers and make local applied to mvebu/soc-kw > ARM: config: Add mvebu_v5_defconfig applied to mvebu/defconfig Great work Andrew! thx, Jason.