From: Wolfgang Denk Date: Sat, 22 Feb 2014 23:43:53 +0100 Subject: [U-Boot] Porting a freescale sabrelite-like board to master ? In-Reply-To: <53090207.5060003@free.fr> References: <5308E4D1.5000509@free.fr> <20140222192018.AC7B23802AE@gemini.denx.de> <53090207.5060003@free.fr> Message-ID: <20140222224353.D494B3801AC@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Thierry, In message <53090207.5060003@free.fr> you wrote: > > > The kernel version is actually totally uninteresting here. What > > matters is what U-Boot version you have. Let me guess - it is some > > v2009.x - i. e. 5 year old stuff? ... > Sorry for the confusion. I should have been more specific. > What I meant is that my current u-boot version is > tag "rel_imx_3.0.35_4.1.0" from > http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git Yes - which is, as I guessed, based on U-Boot v2009.08 (i. e. 5 yeards old code plus a zillion out-of-tree patches). This is totally unusable for any commercial project; the code is unmaintainable. > So I am thinking about re-bringing support for sabrelite my branch, first. As others have explained, this is not your problem. But you still have to port U-Boot to your own hardware. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Unix: Some say the learning curve is steep, but you only have to climb it once. - Karl Lehenbauer