From: Tom Rini Date: Wed, 26 Feb 2014 11:34:33 -0500 Subject: [U-Boot] [PATCH v8 0/14] Driver model implementation, tests, demo and GPIO In-Reply-To: <1392674808-6961-1-git-send-email-sjg@chromium.org> References: <1392674808-6961-1-git-send-email-sjg@chromium.org> Message-ID: <20140226163433.GC16805@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Feb 17, 2014 at 03:06:34PM -0700, Simon Glass wrote: > This series adds a driver model implementation. It is taken from > the driver model code developed by: > > Marek Vasut > Pavel Herrmann > Viktor K?iv?k > Tomas Hlavacek > > Please see doc/driver-model/README.txt for details of how to run this and > what to look for. The old driver model documentation is removed. > > Note: If you are reviewing this code, but don't have a lot of time, please > consider starting with the 'demo' driver (patch 'dm: Add a > demonstration/example driver') since it clearly shows how devices and > uclasses work. Much of this series consists of test code and plumbing, so > is of less interest to driver authors. > > There is also a presentation on driver model at this page: > > http://www.denx.de/wiki/U-Boot/MiniSummitELCE2013 > > You can find a test version of the code used here in branch dm9 at: > > http://git.denx.de/u-boot-x86.git > > (Branch dm contains the original implementation) This looks OK, aside from a comment on 13/14. It does need another rebase, and then I'll grab it. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: