From: Masahiro Yamada Date: Fri, 28 Feb 2014 18:03:00 +0900 Subject: [U-Boot] U-Boot: could not cross-compile u-boot tools In-Reply-To: <53101CBF.3040309@denx.de> References: <20140227143057.GM16805@bill-the-cat> <53101CBF.3040309@denx.de> Message-ID: <20140228180259.94F3.AA925319@jp.panasonic.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Heiko, > >> Is this a Bug, which should be fixed? Any hints? > > > > It seems like we need to pick up > > http://lists.linaro.org/pipermail/linaro-kernel/2013-August/005772.html > > Yes, this seems a way to go... > > @Masahiro: What is your opinion? Hmm, I don't like such a patch because [1] It changes too much [2] We must build tools in two steps. First time, build tools for host make O=path/to/buildhost/ silentoldconfig prepare scripts Second time, built tools for the target make HOSTCC=$CROSS_COMPILE \ KBUILD_SCRIPTROOT=path/to/buildhost/ silentoldconfig prepare scripts It seems ridiculous to type so many magic commands. Heiko, can you check if the following works for you? Modify tools/Makefile as follows --- a/tools/Makefile +++ b/tools/Makefile @@ -5,6 +5,10 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifneq ($(CROSS_BUILD_TOOLS),) +HOSTCC = $(CC) +endif + # # toolchains targeting win32 generate .exe files # Usage: Build tools for host make CROSS_COMPILE= tools Build tools for target make CROSS_BUILD_TOOLS=1 CROSS_COMPILE= tools This is my log. $ make IDS8247_config Configuring for IDS8247 board... $ make CROSS_COMPILE=powerpc-linux-gnu- CROSS_BUILD_TOOLS=1 tools GEN include/autoconf.mk.dep GEN include/autoconf.mk CHK include/config/uboot.release UPD include/config/uboot.release CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CHK include/generated/timestamp_autogenerated.h UPD include/generated/timestamp_autogenerated.h HOSTCC scripts/basic/fixdep CC lib/asm-offsets.s GEN include/generated/generic-asm-offsets.h HOSTCC tools/aisimage.o HOSTCC tools/crc32.o HOSTCC tools/default_image.o HOSTCC tools/dumpimage.o HOSTCC tools/env_embedded.o HOSTCC tools/envcrc.o HOSTCC tools/fdt.o HOSTCC tools/fdt_ro.o HOSTCC tools/fdt_rw.o HOSTCC tools/fdt_strerror.o HOSTCC tools/fdt_wip.o HOSTCC tools/fit_image.o HOSTCC tools/image-fit.o HOSTCC tools/image-host.o HOSTCC tools/image.o HOSTCC tools/imagetool.o HOSTCC tools/imximage.o HOSTCC tools/kwbimage.o HOSTCC tools/md5.o HOSTCC tools/mkenvimage.o HOSTCC tools/mkimage.o HOSTCC tools/mxsimage.o HOSTCC tools/omapimage.o HOSTCC tools/os_support.o HOSTCC tools/pblimage.o HOSTCC tools/sha1.o HOSTCC tools/ublimage.o HOSTLD tools/envcrc HOSTCC tools/gen_eth_addr HOSTCC tools/img2srec HOSTLD tools/mkenvimage HOSTLD tools/dumpimage HOSTLD tools/mkimage HOSTCC tools/proftool $ file tools/mkimage tools/mkimage: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=0xb76ad5a10a41700fcab9e86c079118c424446d89, with unknown capability 0x41000000 = 0xf676e75, with unknown capability 0x10000 = 0x70401, not stripped Uknown Issue: Tools are not stripped. Too big for your target board? Best Regards Masahiro Yamada