From: broonie@kernel.org (Mark Brown) Date: Sat, 1 Mar 2014 12:13:58 +0900 Subject: [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level In-Reply-To: <5310BA99.4050203@wwwdotorg.org> References: <1393534281-30759-1-git-send-email-swarren@wwwdotorg.org> <20140227210227.GE2931@xora-haswell> <530FAFAE.5050800@wwwdotorg.org> <20140228055818.GA29849@sirena.org.uk> <5310BA99.4050203@wwwdotorg.org> Message-ID: <20140301031358.GI29849@sirena.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Feb 28, 2014 at 09:34:33AM -0700, Stephen Warren wrote: > On 02/27/2014 10:58 PM, Mark Brown wrote: > > I'm not sure that renaming the property really deals with the concerns > > though since drivers still all need to manually add support for this, > > shouldn't there be an interrupt controller described in the DT which > > just chains on to the parent with the polarity inverted to do the > > impedence match? > I had thought of that when first dealing with this a couple years ago, > but Olof suggested that was too complicated. It's not obvious to me that it should be especially hard but I've not thought about it too deeply. > Another alternative might be to add an extra IRQ bit in the IRQ > specifier (and something similar would be needed for GPIO specifiers) > that indicates "inversion between source and destination". This could be > queried by drivers in exactly the same way as the existing polarity/type > IRQ flags. We'd need to update each individual IRQ controller binding to > enable that flag, since each binding defines its own definition of such > flags. (although in practice since most use the same centrally suggested > flags, this wouldn't be any more than just saying yes, this binding > allows that new flag to be used). Yes, doing something on the controller side seems more obvious here. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: