From: Jean Delvare Date: Wed, 07 May 2014 07:16:55 +0000 Subject: Re: [lm-sensors] coretemp.0 folder contents changed Message-Id: <20140507091655.3d5e1fc7@endymion.delvare> List-Id: References: <5367C6A7.5020008@linux.intel.com> <20140505173231.GA25644@roeck-us.net> <20140506135558.3cafd062@endymion.delvare> <5368FDB6.3000107@linux.intel.com> In-Reply-To: <5368FDB6.3000107@linux.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Srinivas Pandruvada Cc: Guenter Roeck , "Yu, Fenghua" , Linux Kernel , lm-sensors@lm-sensors.org On Tue, 06 May 2014 08:20:22 -0700, Srinivas Pandruvada wrote: > I maintain thermal daemon, which was using the path. So once Ubuntu > upgrade kernel, > this will break. So I have to make sure that corresponding user space > change is submitted. > I don't want to depend on too many libraries as it also runs on many > embedded platforms > where many library pre-builts don't exists. > (...) > Also when using Android like platform with limited library support, > we have to make sure that libsensor exists. libsensors is small, fast and portable. There's really no excuse for not using it if your daemon is written in C or C++. -- Jean Delvare SUSE L3 Support _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors