From: Marek Vasut <marex@denx.de>
Date: Thu, 15 May 2014 00:24:11 +0200
Subject: [U-Boot] [PATCH 1/2] drivers:dfu: dfu_flush(): add raw data
	flush to complete dfu write
In-Reply-To: <1399889134-31848-1-git-send-email-p.marczak@samsung.com>
References: <1399889134-31848-1-git-send-email-p.marczak@samsung.com>
Message-ID: <201405150024.11840.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday, May 12, 2014 at 12:05:33 PM, Przemyslaw Marczak wrote:
> Before dfu write and flush operations separation,
> dfu write data was flushed by host download request
> with len of zero size.
> 
> Since above change manually calling dfu write with zero
> size has non sense (e.g. in THOR). This should be done by
> flush operation.
> So now dfu_write_buffer_drain() is called in dfu_flush().
> If there is any raw data to flush (like it can be in thor)
> then it will be physically written to medium.

Applied both, thanks.

Best regards,
Marek Vasut