Return-Path: Received: from datenkhaos.de ([81.89.99.198]:52435 "EHLO datenkhaos.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753046AbaIOROE (ORCPT ); Mon, 15 Sep 2014 13:14:04 -0400 Date: Mon, 15 Sep 2014 19:13:58 +0200 From: Johannes Hirte To: Duncan <1i5t5.duncan@cox.net> Cc: linux-btrfs@vger.kernel.org Subject: Re: "Btrfs: device_list_add() should not update list when mounted" breaks subvol mount Message-ID: <20140915191358.373f7e3a@datenkhaos.de> In-Reply-To: References: <20140911002241.201bc6c2@datenkhaos.de> <54110AEC.6040301@oracle.com> <54135AE7.40400@gmail.com> <5413D7E5.6080905@oracle.com> <20140913195525.333f93a4@datenkhaos.de> <20140913232320.64fd189c@datenkhaos.de> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-btrfs-owner@vger.kernel.org List-ID: On Sun, 14 Sep 2014 00:45:49 +0000 (UTC) Duncan <1i5t5.duncan@cox.net> wrote: > Johannes Hirte posted on Sat, 13 Sep 2014 23:23:20 +0200 as excerpted: > > > On Sat, 13 Sep 2014 19:55:25 +0200 Johannes Hirte > > wrote: > > > >> On Sat, 13 Sep 2014 13:36:37 +0800 Anand Jain > >> wrote: > >> > >>> The quickest workaround for you will be to try to match > >>> the device path as in the btrfs fi show -m output to your > >>> probably fstab/mnttab entry. > >> > >> Doesn't work here. I don't even get a path with the affected > >> kernels. I'll get: > >> > >> Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5 > >> Total devices 1 FS bytes used 270.10GiB > >> *** Some devices missing > >> > >> Btrfs v3.16 > >> > >> with a working kernel: > >> > >> Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5 > >> Total devices 1 FS bytes used 270.10GiB > >> devid 1 size 293.89GiB used 289.06GiB path /dev/sda1 > >> > >> Btrfs v3.16 > > >> And now I was able to reproduce on a second machine. The main > >> difference between the affected and the unaffected systems is > >> initramfs. On the affected systems, I don't use one. On the working > >> systems, the rootfs is mounted via initramfs before. I'll test, if > >> an initramfs will solve the issue. Seems likely, cause if I put > >> the disk of an affected system into a working system and mount it > >> there, everything works. > > > > Of course, with the initramfs it works. > > I see a btrfs device scan in the initramfs script. What happens if > you simply run btrfs device scan manually, before doing btrfs > filesystem show? > > I'm guessing that'll fix it. Not tested, but I doubt it will fix it. In this initramfs it is a leftover from a time, when the system was multi-device. On two other systems, initramfs works without the scan. Additionally I can put the affected HDD from the laptop and put it into/on another system, that is affected without initramfs. I can mount it there without any scan before. But I'm not 100% sure if udev takes responsibility for scanning here. regards, Johannes