From: horms@verge.net.au (Simon Horman) Date: Tue, 30 Sep 2014 14:24:51 +0900 Subject: [PATCH v4] ARM: shmobile: r8a7791: link PCI USB devices to USB PHY In-Reply-To: <5270578.Srkf5AOOOJ@wasted.cogentembedded.com> References: <5270578.Srkf5AOOOJ@wasted.cogentembedded.com> Message-ID: <20140930052451.GD24665@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Sep 29, 2014 at 10:23:11PM +0400, Sergei Shtylyov wrote: > Describe the PCI USB devices that are behind the PCI bridges, adding necessary > links to the USB PHY device. > > Signed-off-by: Sergei Shtylyov Thanks, I have queued this up. > > --- > This patch is against 'renesas-devel-20140924-v3.17-rc6' tag of Simon Horman's > 'renesas.git' repo plus R8A7791/Koelsch/Henninger USB PHY support patches posted > before. The patch requires the USB PHY driver and USB HCD generic PHY support > (merged by Kishon and Greg recently) in order to work. > > Changes in version 4: > - refreshed the patch. > > Changes in version 3: > - adjusted "phys" properties in the PCI OHCI/EHCI device nodes; > - resolved rejects. > > Changes in version 2: > - renamed the PCI OHCI/EHCI device nodes to comply with the PCI binding; > - changed the PHY specifier in the PCI#1 node to reflect that channel #1 support > was dropped; > - resolved rejects. > > arch/arm/boot/dts/r8a7791.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > Index: renesas/arch/arm/boot/dts/r8a7791.dtsi > =================================================================== > --- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi > +++ renesas/arch/arm/boot/dts/r8a7791.dtsi > @@ -1125,6 +1125,20 @@ > interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH > 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH > 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; > + > + usb at 0,1 { > + reg = <0x800 0 0 0 0>; > + device_type = "pci"; > + phys = <&usb0 0>; > + phy-names = "usb"; > + }; > + > + usb at 0,2 { > + reg = <0x1000 0 0 0 0>; > + device_type = "pci"; > + phys = <&usb0 0>; > + phy-names = "usb"; > + }; > }; > > pci1: pci at ee0d0000 { > @@ -1145,6 +1159,20 @@ > interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH > 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH > 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; > + > + usb at 0,1 { > + reg = <0x800 0 0 0 0>; > + device_type = "pci"; > + phys = <&usb2 0>; > + phy-names = "usb"; > + }; > + > + usb at 0,2 { > + reg = <0x1000 0 0 0 0>; > + device_type = "pci"; > + phys = <&usb2 0>; > + phy-names = "usb"; > + }; > }; > > pciec: pcie at fe000000 { > > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >