From: Tom Rini Date: Mon, 20 Oct 2014 11:13:37 -0400 Subject: [U-Boot] [PATCH 0/14] dm: omap: Provide access to driver model for am335x, and move boards In-Reply-To: References: <1411400934-7754-1-git-send-email-sjg@chromium.org> Message-ID: <20141020151337.GL25506@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Oct 14, 2014 at 09:26:51AM +0200, Simon Glass wrote: > Hi, > > On 22 September 2014 17:48, Simon Glass wrote: > > This series adjusts the serial and GPIO drivers, used by Beaglebone for > > example, to work with driver model. Since there are still boards using > > these drivers but not driver model, this adds new functionality rather > > than replacing what exists. > > > > Several patches tweak and fix the existing driver model serial and GPIO > > implementation. > > > > There are two Beaglebone Black configurations: > > > > - Device tree control with verified boot > > - No device tree control > > > > The first uses device tree to select the serial console and provide > > information needed by the serial driver (similar to how things work on > > Tegra). The second uses platform data provided by a common board file. > > > > Both are converted, so this is a good example of how to support both device > > tree and platform data if needed. > > Are there any comments on this series please? As part of settling back into the groove, I need to fire these up on my am335x boards and go from there. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: