From: Wolfgang Denk Date: Wed, 22 Oct 2014 18:56:11 +0200 Subject: [U-Boot] Relocation issue - need help! In-Reply-To: References: <20141022123929.5FD0B3834D1@gemini.denx.de> Message-ID: <20141022165611.ED5203832AC@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Dirk, In message you wrote: > I had exactly the same behaviour some time ago and tracked it down to > this (and posted it on the mailing list, but sadly got no feedback): Thanks a lot for this pointer. > So there a three things to notice: > 1. Do not use gcc 4.8 and u-boot at the moment. > 2. You might not notice that you have a problem until you erase u-boot > from flash (and get your cache flushed). > 3. Handling relro properly should be on the TODO-List I confirm that the problem is in my case with gcc 4.8.1, too. I did not try another compiler yet. > Maybe this is already common knowledge an maybe somebody is already > working on this - but I did not notice yet. So in this case: sorry for > the noise :) I highly appreciate your hint, it was definitely very useful. Thanks! Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The ultimate barrier is one's viewpoint. - Terry Pratchett, _The Dark Side of the Sun_