From: Tom Rini Date: Thu, 23 Oct 2014 13:15:56 -0400 Subject: [U-Boot] [U-Boot, U-boot, v3, 1/4] dma: ti-edma3: introduce edma3 driver In-Reply-To: <1413989279-31703-2-git-send-email-ivan.khoronzhuk@ti.com> References: <1413989279-31703-2-git-send-email-ivan.khoronzhuk@ti.com> Message-ID: <20141023171556.GP25506@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Oct 22, 2014 at 05:47:56PM +0300, Khoronzhuk, Ivan wrote: > The EDMA3 controller?s primary purpose is to service data transfers > that you program between two memory-mapped slave endpoints on the device. > > Typical usage includes, but is not limited to the following: > - Servicing software-driven paging transfers (e.g., transfers from external > memory, such as SDRAM to internal device memory, such as DSP L2 SRAM) > - Servicing event-driven peripherals, such as a serial port > - Performing sorting or sub-frame extraction of various data structures > - Offloading data transfers from the main device DSP(s) > - See the device-specific data manual for specific peripherals that are > accessible via the EDMA3 controller > > Signed-off-by: Ivan Khoronzhuk Applied to u-boot-ti/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: