From: Wolfgang Denk Date: Wed, 05 Nov 2014 20:09:02 +0100 Subject: [U-Boot] buildman: using wrong libgcc.a (magic -3) In-Reply-To: <545A74E6.5010208@broadcom.com> References: <54526E0F.5090500@broadcom.com> <5452A2A6.5000601@broadcom.com> <5452A643.6000309@myspectrum.nl> <545A707A.4090600@myspectrum.nl> <545A74E6.5010208@broadcom.com> Message-ID: <20141105190902.847643833C7@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Steve, In message <545A74E6.5010208@broadcom.com> you wrote: > > In my experience, we would normally set the CROSS_COMPILE variable to > the "prefix" of the cross compiler toolchain, for example: > > CROSS_COMPILE=/opt/eldk-5.4/armv7a/sysroots/i686-eldk-linux/usr/bin/armv7a-vfp-neon-linux-gnueabi/arm-linux-gnueabi- Actually we should have only CROSS_COMPILE=arm-linux-gnueabi- and make the PATH take care of where to pick the tools from. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Your csh still thinks true is false. Write to your vendor today and tell them that next year Configure ought to "rm /bin/csh" unless they fix their blasted shell. :-) - Larry Wall in Configure from the perl distribution