From: Wolfgang Denk Date: Mon, 17 Nov 2014 12:44:40 +0100 Subject: [U-Boot] loadb problem. Hangs on START_CHAR In-Reply-To: <1416218063825-196499.post@n7.nabble.com> References: <1415364802594-195144.post@n7.nabble.com> <1415622808801-195379.post@n7.nabble.com> <20141110125119.79476383346@gemini.denx.de> <1415624206506-195381.post@n7.nabble.com> <1416218063825-196499.post@n7.nabble.com> Message-ID: <20141117114440.822773814FF@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Bo, In message <1416218063825-196499.post@n7.nabble.com> you wrote: > > If I turn down the baud rate to 9600, as well as set a line delay of 100 ms, > the loadb transfer works, and I get 0x240 bytes of Hello World at the > address of my choice. > > So, it seems to be some kind of baud rate missmatch between my board and the You may want to attach a scope and measure the timing, then. > PC. The console works fine in 115200 baud, so I'm a bit lost here. Does > kermit require slow transfers? No, not at all. On contrary, the whole design is set up to provide fastest binary download as permitted by the baud rate. Did you include these options in your port settings? set carrier-watch off set handshake none set flow-control none set file type bin set file name lit set rec pack 1000 set send pack 1000 set window 5 robust ? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away. - Antoine de Saint-Exupery