From: horms@verge.net.au (Simon Horman) Date: Mon, 5 Jan 2015 09:46:02 +0900 Subject: [PATCH] ARM: shmobile: r8a7794: Correct SDHI clock node names In-Reply-To: <1420418648-7815-1-git-send-email-horms+renesas@verge.net.au> References: <1420418648-7815-1-git-send-email-horms+renesas@verge.net.au> Message-ID: <20150105004602.GG2817@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Jan 05, 2015 at 09:44:08AM +0900, Simon Horman wrote: > Correct the SDHI clock node names to match their labels > and the documentation. > > This has no run-time affect as the clock nodes are not currently used. > > Reported-by: Sergei Shtylyov > Signed-off-by: Simon Horman This patch is based on renesas-devel-20141231-v3.19-rc2 > --- > arch/arm/boot/dts/r8a7794.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi > index 8f78da5..9856e9c 100644 > --- a/arch/arm/boot/dts/r8a7794.dtsi > +++ b/arch/arm/boot/dts/r8a7794.dtsi > @@ -294,14 +294,14 @@ > "lb", "qspi", "sdh", "sd0", "z"; > }; > /* Variable factor clocks */ > - sd1_clk: sd2_clk at e6150078 { > + sd1_clk: sd1_clk at e6150078 { > compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; > reg = <0 0xe6150078 0 4>; > clocks = <&pll1_div2_clk>; > #clock-cells = <0>; > clock-output-names = "sd1"; > }; > - sd2_clk: sd3_clk at e615007c { > + sd2_clk: sd2_clk at e615007c { > compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; > reg = <0 0xe615007c 0 4>; > clocks = <&pll1_div2_clk>; > -- > 2.1.3 >