From: Guenter Roeck Date: Tue, 06 Jan 2015 18:21:06 +0000 Subject: Re: [lm-sensors] [PATCH v8 0/5] hwmon: ina2xx: implement chip reinitialization and add new attribute Message-Id: <20150106182105.GA1037@roeck-us.net> List-Id: References: <1420467656-6112-1-git-send-email-bgolaszewski@baylibre.com> In-Reply-To: <1420467656-6112-1-git-send-email-bgolaszewski@baylibre.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Bartosz Golaszewski Cc: LKML , Benoit Cousson , Patrick Titiano , LM Sensors On Mon, Jan 05, 2015 at 03:20:51PM +0100, Bartosz Golaszewski wrote: > This series implements a mechanism to detect if the chip is in its POR state > and reinitialize it if needed. It also extends the sysfs interface to make the > driver configurable at run-time. > > The shunt_resistor attribute allows to change the shunt resistance value > at run-time in cases where ina2xx used to do the measurement isn't integrated > with the shunt. > > The avg_rate attribute allows to increase/decrease noise reduction. > Patches 1-4 added to -next; please don't resend. I'll do some testing before publishing it. Comments to patch 5 sent out a minute ago. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors