From: Tom Rini Date: Fri, 23 Jan 2015 16:29:24 -0500 Subject: [U-Boot] [RFC] m68k: generic board In-Reply-To: <54B7D7F8.8020004@sysam.it> References: <54B7D7F8.8020004@sysam.it> Message-ID: <20150123212924.GM10826@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Jan 15, 2015 at 04:08:40PM +0100, Angelo Dureghello wrote: > Dear all, > > i would like to post a patch with the m68k generic board > support, tested and working here, but of course not tested > for all the other m68k boards except mine. > > My coldfire board is the "amcore" board not yet accepted. > > http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193661 > http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193660 > > I need some suggestions on how to proceed now. > > I already modified my board config to work with generic board > support. > > So my thought is to post 2 separate patches: > 1 > - add generic board (1/1). Each board maintainer should then > test it and report for feedbacks. > 2 > Re-post a 2/2 patch (v8) of amcore using generic board: > - amcore board (1), > - mcf5307 support (2), > > This amcore board is the coldfire base i use here for all the > general m68k tests. > > With your help commenting on this patch until it is conformant > to the last recent coding guidelines could help me and Alison > to know what has to be purged / changed, (eventually, if needed) > in all other m68k boards code. > > What do you think ? Lets go with #2 and we'll purge the rest of the boards that you don't want to convert and compile test after -rc1. Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: