From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=) Date: Thu, 19 Feb 2015 10:37:52 +0100 Subject: [PATCH 7/7] serial: imx: add support for half duplex rs485 In-Reply-To: References: <1424292068-28197-1-git-send-email-u.kleine-koenig@pengutronix.de> <1424292068-28197-7-git-send-email-u.kleine-koenig@pengutronix.de> Message-ID: <20150219093752.GO19388@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello Aur?lien, On Thu, Feb 19, 2015 at 10:15:10AM +0100, aur?lien bouin wrote: > 2015-02-18 21:41 GMT+01:00 Uwe Kleine-K?nig : > > The transmitter is expected to be controlled by the UART's RTS pin. > > You definately can be more open in using the last patch I have sent > the 11th of februrary using rs485.padding[0] that give in parameter > the GPIO to use for transmit pin you have a link? Without having seen that patch this can well be a separate patch. And (also without having seen the patch) I wonder why the information which gpio to use doesn't come from the device tree but is supplied by userspace. I thought about expanding mctrl-gpio for that, but as there are a few conflicting patches to mctrl-gpio out I wanted to wait until the dust settles. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |