From: Guenter Roeck Date: Fri, 27 Feb 2015 21:30:44 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: (nct7904) Strenghten detect function Message-Id: <20150227213044.GA1661@roeck-us.net> List-Id: References: <1425054979-27598-1-git-send-email-linux@roeck-us.net> In-Reply-To: <1425054979-27598-1-git-send-email-linux@roeck-us.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Fri, Feb 27, 2015 at 08:27:04PM +0300, Vadim V. Vlasov wrote: > Hi Guenter! > > Yes, I can confirm that the bits are always zero, even if the bank > is set to an invalid number. > > I used i2cset/i2cdump and regardless of the bank selection > (I tried 5, 6, 0x32, 0x66 and 0xff) the higher bits are read back > as zero. However, the lower bits return the selected bank > number even if it is invalid (i.e. 5, 6, 2, 6 and 7 for the above > tests). > That is what I suspected. > The ID bytes (0x7a-0x7c) are always correct (0x50, 0xc5, 0x51) for > invalid banks as well (the rest of the bytes are 0xff's). > Great, thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors