From: Tom Rini Date: Tue, 28 Apr 2015 12:39:41 -0400 Subject: [U-Boot] [PATCH 2/4] mx6cuboxi: Add USB host support In-Reply-To: References: <1430188244-28216-1-git-send-email-festevam@gmail.com> <1430188244-28216-2-git-send-email-festevam@gmail.com> <20150428144843.GJ16702@bill-the-cat> Message-ID: <20150428163941.GP16702@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Apr 28, 2015 at 12:20:46PM -0300, Fabio Estevam wrote: > On Tue, Apr 28, 2015 at 12:11 PM, Fabio Estevam wrote: > > Hi Tom, > > > > On Tue, Apr 28, 2015 at 11:48 AM, Tom Rini wrote: > > > >> Since we have FEC do we really need to add ASIX as well? Also, what > > > > I can remove it if needed. Just kept the same as done in the Solidrun's U-boot. > > > >> devices did you test this with for USB? I grabbed a Sandisk USB drive > >> and on the i2eX I have, the bottom USB port doesn't see it and on the > >> top I get: > >> scanning bus 1 for devices... failed to set default configuration len 0, > >> status 80000000 > > > > I tested with USB pen drive and USB keyboard and it could recognize them. > > > > Only the bottom top works for me and the same is seen on Solidrun's U-boot. > > Ops, I mean "Only the bottom USB port works for me". How many USB pen drives do you have handy? I confirmed that my keyboards don't work on my Allwinner board (A20 OLinuXino Lime2) but the pen drive does (scanned, loaded and crc32'd a file). I'll try and do the same test on my Sabrelite shortly. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: