From: Thomas Petazzoni Date: Tue, 30 Jun 2015 23:29:41 +0200 Subject: [Buildroot] [PATCH v3 1/1] board: add support for WarPboard In-Reply-To: <1435324405-26828-1-git-send-email-lambertarthur22@gmail.com> References: <1435324405-26828-1-git-send-email-lambertarthur22@gmail.com> Message-ID: <20150630232941.5a2a1b2e@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Arthur LAMBERT, On Fri, 26 Jun 2015 15:13:25 +0200, Arthur LAMBERT wrote: > This is a set of patch to add support for warpboard (Freescale board based on imx6sl) > > The patch contains : > - defconfig for warpboard > - linux patches from Fabio Estevam to fix device tree due to last change on warpboard schematics (rev 1.12) > and to fix kernel imx_v6_v7 defconfig which use incorrect hci protocol > - specific firmware file for warpboard bluetooth (nvram : brcmfmac4330-sdio.txt) That's a detail, but the commit log should be wrapped to 80 columns. > +- transfer uboot into flash by running this command in host side: > + $ sudo dfu-util -D output/images/u-boot.imx -a boot So maybe you should build the host-dfu-util package of Buildroot by selecting it in the Buildroot defconfig, and use it here? > +- remove power and put warpboard into normal boot mode by opening the jumper. > + > +Update linux & rootfs > +===================== > + > +Use ums command from uboot prompt to mount emmc as mass storage and update zImage, device tree and rootfs file Which rootfs file? The tarball or the ext2 one? > +Enable bluetooth (need to enable bluez-util) > +================ > +hciattach /dev/ttymxc4 any > +hciconfig hci0 up Maybe: Using Bluetooth =============== Enable the bluez_utils package, and then: $ hciattach /dev/ttymxc4 any $ hciconfig hci0 up Of course, make sure you're really talking about bluez_utils or bluez_utils5, we have two separate packages in Buildroot. Could you take into account those minor comments, and send an updated version? Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com