From: Guenter Roeck Date: Wed, 01 Jul 2015 17:53:40 +0000 Subject: Re: [lm-sensors] [PATCH V2 0/3] hwmon:f71882fg add new Fintek SuperIO support Message-Id: <20150701175340.GA6453@roeck-us.net> List-Id: References: <1435627870-12249-1-git-send-email-hpeter+linux_kernel@gmail.com> In-Reply-To: <1435627870-12249-1-git-send-email-hpeter+linux_kernel@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Peter Hung Cc: jdelvare@suse.de, lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw, peter_hong@fintek.com.tw, Peter Hung On Tue, Jun 30, 2015 at 09:31:07AM +0800, Peter Hung wrote: > The first patch will add Fintek F81866/F71868 SuperIO > with H/W monitor function to f71882fg.c > > But some F81866 functional address is differ from F71882fg. > The following 2 patches will fix this problem. > > Changelog: > > V2 > Fix comments by Guenter Roeck > all newer add IC should keep chip IDs in numeric order. > > > Peter Hung (3): > hwmon:f71882fg add f81866/f71868 SuperIO support > hwmon:f71882fg fix f81866a temp/beep setting > hwmon:f71882fg fix f81866a voltage protection > > drivers/hwmon/f71882fg.c | 162 +++++++++++++++++++++++++++++++++++++---------- > 1 file changed, 130 insertions(+), 32 deletions(-) > Series applied to -next. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors