From: Thomas Petazzoni Date: Thu, 17 Sep 2015 23:56:11 +0200 Subject: [Buildroot] [PATCH v2] microzed: add Avnet Microzed support In-Reply-To: <1442388911-3719-1-git-send-email-d.viti@infosolution.it> References: <1442388911-3719-1-git-send-email-d.viti@infosolution.it> Message-ID: <20150917235611.20ea0e1c@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear Davide Viti, On Wed, 16 Sep 2015 09:35:11 +0200, Davide Viti wrote: > Changes are based on Zedboard: Xilinx does not provide a specific DTS > for Microzed in the kernel tree. It is suggested [1] to use the > zynq-zed.dts and change the RAM size > > [1] https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856 > > Signed-off-by: Davide Viti > --- > Changes v1 -> v2: > - Mention reason for using Zedboard DTS (Jan Viktorin) > - remove unnecessary spaces from board/avnet/microzed/readme.txt > > board/avnet/microzed/readme.txt | 65 ++++++++++++++++++++++ > ...eate-microzed-specific-U-Boot-environment.patch | 34 +++++++++++ > configs/microzed_defconfig | 26 +++++++++ > 3 files changed, 125 insertions(+) > create mode 100644 board/avnet/microzed/readme.txt > create mode 100644 board/avnet/microzed/uboot/0001-zynq-Create-microzed-specific-U-Boot-environment.patch > create mode 100644 configs/microzed_defconfig Thanks, applied, after doing some minor tweaks: [Thomas: - extend readme.txt to indicate why the same DTB is used for Microzed and the Zedboard. - add a description + Signed-off-by line in the 0001-zynq-Create-microzed-specific-U-Boot-environment.patch, by re-using the description of the same patch for the Zedboard.] Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com