From: Peter Seiderer Date: Fri, 30 Oct 2015 21:12:18 +0100 Subject: [Buildroot] Qt5 and touchscreen calibration In-Reply-To: <5633A776.90600@mind.be> References: <5633A11C.6070706@yahoo.fr> <5633A776.90600@mind.be> Message-ID: <20151030211218.6c801173@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello David, Arnout, On Fri, 30 Oct 2015 18:23:02 +0100, Arnout Vandecappelle wrote: > On 30-10-15 17:55, David Picard wrote: > > Hello, > > > > > > I got my touchscreen working perfectly with ts_test. Many thanks to Peter > > Seiderer ! > > > > But the thing is that my Qt5 app does not grab the touchscreen properly : x and > > y axis are switched. I did enable the tslib option under Qt5 in menuconfig. Is The following $ QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS='rotate=270' /usr/lib/qt/examples/touch/fingerpaint/fingerpaint -platform linuxfb:fb=/dev/fb1 worked for me to get x/y right, see [1] for Qt5 parameters. Regards, Peter [1] http://doc.qt.io/qt-5/embedded-linux.html > > there some magic command line option to pass to the application ? I tried this : > > > > $ myapp -platform linuxfb:fb=/dev/fb1 -plugin tslib > > ts_open() failed (No such file or directory) > > Did you export QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS=/dev/input/event0 (but > replace with the correct device of course)? > > Or hang on, for tslib it's TSLIB_TSDEVICE that you have to set. > > > Regards, > Arnout > > > > >>>> the app shows up, but TS still messed up. > > > > My config : > > - Raspberry Pi B+ and Adafruit 2.8" PiTFT w/ cap touch. > > - Buildroot 2015.08.1 > > - Qt5 w/ tslib support enabled (BR2_PACKAGE_QT5BASE_TSLIB=y). > > > > > > Regards, > > David. > > > > > > _______________________________________________ > > buildroot mailing list > > buildroot at busybox.net > > http://lists.busybox.net/mailman/listinfo/buildroot > > > >