From: Tom Rini Date: Sat, 7 Nov 2015 21:18:45 -0500 Subject: [U-Boot] [PATCH] Makefile: Include vendor common library in include search path In-Reply-To: References: <1446708504-5936-1-git-send-email-nm@ti.com> <563B0603.6040406@ti.com> <563CDEEF.3070403@ti.com> <20151106182348.GA14217@ogun.home> Message-ID: <20151108021845.GI8499@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Nov 06, 2015 at 03:58:17PM -0800, Simon Glass wrote: > Hi, > > On 6 November 2015 at 10:23, Nishanth Menon wrote: > > On 11:10-20151106, Nishanth Menon wrote: > >> On 11/05/2015 10:50 PM, Masahiro Yamada wrote: > >> > 2015-11-06 12:30 GMT+09:00 Nishanth Menon : > >> >> On Thu, Nov 5, 2015 at 6:15 PM, Simon Glass wrote: > >> >>> Hi, > >> >>> > >> >>> On 5 November 2015 at 00:32, Nishanth Menon wrote: > >> >>>> On 11/05/2015 01:28 AM, Nishanth Menon wrote: > >> >>>>> When the vendor common libraries exists, then board should be able to > >> >>>>> reference headers located there, rather than having to do weird logic > >> >>>>> such as '#include "../common/xyz.h"'. > >> >>>>> > >> >>>>> Signed-off-by: Nishanth Menon > >> >>>>> --- > >> >>>>> > >> >>>>> Makefile | 1 + > >> >>>>> board/ti/am57xx/board.c | 2 +- > >> >>>>> 2 files changed, 2 insertions(+), 1 deletion(-) > >> >>>> > >> >>>> Arrgh.. Apologies on the diffstat messup, but anyways, the patch does > >> >>>> apply, and will wait to repost in case of further comments. > >> >>>> > >> >>>>> > >> >>>>> diff --git a/Makefile b/Makefile > >> >>>>> index 3c21f8ddf9e9..75d5ea802dfd 100644 > >> >>>>> --- a/Makefile > >> >>>>> +++ b/Makefile > >> >>>>> @@ -620,6 +620,7 @@ c_flags := $(KBUILD_CFLAGS) $(cpp_flags) > >> >>>>> # U-Boot objects....order is important (i.e. start must be first) > >> >>>>> > >> >>>>> HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) > >> >>>>> +UBOOTINCLUDE += $(if $(HAVE_VENDOR_COMMON_LIB:y=1), -I$(srctree)/board/$(VENDOR)/common) > >> >>>>> > >> >>>>> libs-y += lib/ > >> >>>>> libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ > >> >>>>> > >> >>>> > >> >>> > >> >>> I suppose this is OK. But it might be hard to figure out where a > >> >>> header file is coming from. I wonder if we could make it support: > >> >>> > >> >>> #include > >> >>> > >> >>> and it would find the file? > >> >>> > >> >> > >> >> Hmmm... Are folks ok if I create a softlink? > >> > > >> > > >> > Or, you can maybe add the following into board/ti/am57xx/Makefile. > >> > > >> > subdir-ccflags-y := -I$(src)/../common > >> > > >> > then, you can use #include from your board/ti/am57xx/board.c > >> > >> I could, OR i could even do ../common/xyz.h (which is what current > >> board files do) > >> > >> > > >> > > >> > > >> > But, I personally wouldn't do this in this case > >> > for the reason Simon mentioned. > >> > > >> > >> I agree as well. but the files are built without explicit board level > >> Makefile rules, but the root Makefile(which makes this happen) does > >> not ensure the headers are made available - that sounds contradictory. > >> > >> > > >> > How many vender-common do we have > >> > and is it worth supporting #include ? > >> > >> Surprisingly larger set that what I expected: > >> $ git branch -v|grep "^*" > >> * master c3c016cf7536 sf: Add SPI NOR protection mechanism > >> $ find board/ -iname "common"|wc -l > >> 19 > >> $ git grep "#include \"../common" board/|wc -l > >> 141 > >> > > Illustration Purposes only: example of how a > > #include > to do? > > diff --git a/Kconfig b/Kconfig > > index 821b464db207..6e825be0545e 100644 > > --- a/Kconfig > > +++ b/Kconfig > > @@ -224,6 +224,8 @@ endmenu # Boot images > > > > source "common/Kconfig" > > > > +source "board/Kconfig" > > + > > source "dts/Kconfig" > > > > source "net/Kconfig" > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > > index 0d756cbc55a2..62c9b90eac79 100644 > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -356,6 +356,7 @@ config TARGET_AM335X_EVM > > select DM > > select DM_SERIAL > > select DM_GPIO > > + select CREATE_BOARD_SYMLINK > > > > config TARGET_AM335X_SL50 > > bool "Support am335x_sl50" > > diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf > > index d668982cc1dd..3f9b969c2271 100644 > > --- a/scripts/Makefile.autoconf > > +++ b/scripts/Makefile.autoconf > > @@ -125,6 +125,23 @@ else > > ln -fsn $$dest arch/$(ARCH)/include/asm/arch > > endif > > endif > > +ifdef CONFIG_CREATE_BOARD_SYMLINK > > +ifneq ($(KBUILD_SRC),) > > + if [ -d $(KBUILD_SRC)/board/$(VENDOR)/common/include ]; then \ > > + dest=board/$(VENDOR)/common/include; \ > > + else \ > > + dest=board/$(VENDOR)/common; \ > > + fi; \ > > + ln -fsn $(KBUILD_SRC)/$$dest include/board-common > > +else > > + if [ -d board/$(VENDOR)/common/include ]; then \ > > + dest=board/$(VENDOR)/common/include; \ > > + else \ > > + dest=board/$(VENDOR)/common; \ > > + fi; \ > > + ln -fsn ../$$dest include/board-common > > +endif > > +endif > > > > PHONY += FORCE > > FORCE: > > -- > > It looks reasonable to me. Tom and Masahiro may have opinions on this too. Conceptually fine with me. Do we really need a config option for it tho? -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: