From: Andreas Werner Date: Thu, 10 Dec 2015 18:03:14 +0000 Subject: Re: [lm-sensors] LM90 driver and ti tmp461 detection Message-Id: <20151210180314.GB28022@awelinux> List-Id: References: <20151210120856.GA27765@awelinux> <5669AB55.5030309@roeck-us.net> <20151210171231.GA28022@awelinux> <5669B9D9.9050908@roeck-us.net> In-Reply-To: <5669B9D9.9050908@roeck-us.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Guenter Roeck Cc: Andreas Werner , linux-kernel@vger.kernel.org, jdelvare@suse.com, lm-sensors@lm-sensors.org, wni@nvidia.com ... > On Thu, Dec 10, 2015 at 09:43:53AM -0800, Guenter Roeck wrote: > > > >There is one difference. The temperature ranges differ: > > > >TMP451: > >Standard Mode: 0 to +127 > >Extended Mode: -64 to +191 > > > >TMP461: > >Standard Mode: -40 to +127 > >Extended Mode: -64 to +191 > > > >Therefore the calcualtion is different then the tmp451 one. > > > Not really. The tmp451 will return 0 for negative temperatures in standard mode, > the tmp461 will return negative (signed) values. Temperatures are stored > as signed values, so the code should be ok as is. Am I missing something ? > It will work to read the local and external temperature yes, but not for setting the temperatur. If setting in standard mode, the tmp451 part fix the value to 0-127 but for the tmp461 we have -40 to 127. I'v currently no chip here in the office to test it, hopefully I will get one next week. > >I also aggree with you with the magical ID register. I hate such > >kind of register with are not documented and may have a value. > > > >I have a DT based board yes, but i have also planed to submit my changes > >and also wanted to implement the autodetection of the chip. > > I don't think auto-detection (other than handling the chip as tmp451) > will be possible, but I am looking forward to seeing your patch(es). > Yes, i think autodetection makes it very crapy. May be i will find another solution. > > > >I have also planned (or need) to implement the "n-Factor Correction" for the > >CPU diodes. There is a register to set this value in the tmp451 and tmp461. > >Would that make sense to add a DT property for the driver to be able > >to set this value? What do you think? > > > Yes, since this is a board (hardware) property. Other chips have similar > registers. We'll just have to find a good set of property names and descriptions. > Ok, I will find a way to do it :-) > Thanks, > Guenter > Regards Andy _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors