From: Andreas Werner Date: Thu, 10 Dec 2015 18:09:28 +0000 Subject: Re: [lm-sensors] LM90 driver and ti tmp461 detection Message-Id: <20151210180928.GC28022@awelinux> List-Id: References: <20151210120856.GA27765@awelinux> <5669AB55.5030309@roeck-us.net> <20151210171231.GA28022@awelinux> <5669BB37.3050207@roeck-us.net> In-Reply-To: <5669BB37.3050207@roeck-us.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Guenter Roeck Cc: Andreas Werner , linux-kernel@vger.kernel.org, jdelvare@suse.com, lm-sensors@lm-sensors.org, wni@nvidia.com ... >On Thu, Dec 10, 2015 at 09:49:43AM -0800, Guenter Roeck wrote: > > > >I have a DT based board yes, but i have also planed to submit my changes > >and also wanted to implement the autodetection of the chip. > > > >I have also planned (or need) to implement the "n-Factor Correction" for the > >CPU diodes. There is a register to set this value in the tmp451 and tmp461. > >Would that make sense to add a DT property for the driver to be able > >to set this value? What do you think? > > > > See max6697.c for some examples. Maybe we can use similar bindings. > Seems to be a good way. I think I will also add the extended mode selection via DT. > Guenter > Regards Andy _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors