From: Tom Rini Date: Sun, 13 Dec 2015 20:21:09 -0500 Subject: [U-Boot] spl: mmc: use block device number, not hard-coded 0 In-Reply-To: <1449343948-14839-1-git-send-email-eric@nelint.com> References: <1449343948-14839-1-git-send-email-eric@nelint.com> Message-ID: <20151214012109.GA3253@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sat, Dec 05, 2015 at 12:32:28PM -0700, Eric Nelson wrote: > In order to support boot from multiple devices through board_boot_order, > it's necessary to use the block number of a device. > > The use of a hard-coded 0 for the device number also creates a need > to re-order block devices for use in SPL like this: > http://git.denx.de/?p=u-boot.git;a=blob;f=board/freescale/mx6slevk/mx6slevk.c;hb=HEAD#l195 We also do similar'ish things for TI parts (we only register what we're booting from). So, before this can be applied don't we also need a patch for mx6slevk and for TI ones too (but that should be "easier" since I think it just becomes we always use the normal board_mmc_init) ? Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: