From: Tom Rini Date: Mon, 14 Dec 2015 15:19:54 -0500 Subject: [U-Boot] [U-Boot, 1/2] am33xx, ddr3: fix ddr3 sdram configuration In-Reply-To: <1449066477-15522-1-git-send-email-samuel.egli@siemens.com> References: <1449066477-15522-1-git-send-email-samuel.egli@siemens.com> Message-ID: <20151214201954.GC17758@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Dec 02, 2015 at 03:27:56PM +0100, Egli, Samuel wrote: > This patch fixes the DDR3 initialization procedure in > order to comply with DDR3 standard. A 500 us delay is specified > between the DDR3 reset and clock enable signal. Until now, > this delay was not respected. Some DDR3 chips don't bother > but the bigger the RAM becomes the more likely it seems that > this delay is needed. We observed that DRAM > 256 MB from > the manufacturer Samsung have an issue when the specification > is not respected. > > Changes: > > 1) Add a 1 ms wait for L3 timeout error trigger > > 2) Don't delay DDR3 initialization > Bit 31 of emif_sdram_ref_ctrl shouldn't be set because his > suppresses the initialization of DDR3 > > Signed-off-by: Samuel Egli > Reviewed-by: James Doublesin > Cc: Tom Rini > Cc: Felipe Balbi > Cc: Roger Meier > Cc: Heiko Schocher Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: