From: Guenter Roeck Date: Thu, 17 Dec 2015 14:57:51 +0000 Subject: Re: [lm-sensors] LM90 driver and ti tmp461 detection Message-Id: <20151217145751.GA21030@roeck-us.net> List-Id: References: <20151210120856.GA27765@awelinux> <5669AB55.5030309@roeck-us.net> <20151210171231.GA28022@awelinux> <20151212110842.10e7693e@endymion.delvare> <20151215151123.GA2349@awelinux> <20151217124808.63f8f54f@endymion.delvare> In-Reply-To: <20151217124808.63f8f54f@endymion.delvare> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Jean Delvare Cc: Andreas Werner , wni@nvidia.com, lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org On Thu, Dec 17, 2015 at 12:48:08PM +0100, Jean Delvare wrote: > Hi Andreas, > > On Tue, 15 Dec 2015 16:11:24 +0100, Andreas Werner wrote: > > here is the register dump of the tmp461. > > Thanks. > > > It seemse that we really cannot detect if it is a tmp461 or a tmp451. > > Also the magic "ID Register" offset 0xff is 0x00 for both devices. > > I would use register 0x16, which doesn't exist but reads 0x00 on the > TMP451. It could in theory also read 0x00 on the TMP461 but only if > both channels are disabled, which makes little sense. More likely at > least one channel will be enabled so you'll have value 0x01-0x03 if > this is a TMP461. > Excellent idea! Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors