From: horms@verge.net.au (Simon Horman) Date: Fri, 18 Dec 2015 10:46:59 +0900 Subject: [PATCH 0/2] ARM: shmobile: gose: Add GPIO keys and leds to DT In-Reply-To: References: <1447885235-17858-1-git-send-email-horms+renesas@verge.net.au> Message-ID: <20151218014659.GE1164@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Dec 17, 2015 at 12:53:12PM +0900, Magnus Damm wrote: > Hi Simon, > > On Thu, Nov 19, 2015 at 7:20 AM, Simon Horman > wrote: > > Hi, > > > > this short series adds GPIO keys and leds to the device tree > > of the r8a7793 based Gose board. > > > > It uses the makes use of the recently addition of GPIO devices > > to the device tree of the r8a7793. Thanks Magnus! > > > > I have booted a system with these changes and verified that the > > relevant entries appear to be present in sysfs. > > > > I have not tested button press events or illumination of the leds > > as I do not currently have physical access to a Gose board. > > > > Based on renesas-devel-20151118-v4.4-rc1 > > > > Simon Horman (2): > > ARM: shmobile: gose: Add GPIO keys to DT > > ARM: shmobile: gose: Add GPIO leds to DT > > > > arch/arm/boot/dts/r8a7793-gose.dts | 98 ++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 98 insertions(+) > > Thanks a lot for these patches! Very useful as basic a test > environment for the r8a7793 GPIO device nodes. > > So I've now managed to test the GPIO keys and LED devices on a > physical Gose board. The LED6 -> LED 8 entries will be lit as expected > by controlling brightness in /sys/class/leds/. The GPIO keys > associated with buttons SW30 to SW36 and the dip switch SW2 all > generate interrupts in /proc/interrupts on key press or dip switch > change. All good! > > Please queue up these changes. Feel free to add: > > Tested-by: Magnus Damm Thanks, I have queued these up for v4.6.