From: =?UTF-8?B?QmVub8OudA==?= Allard Date: Mon, 25 Apr 2016 16:16:10 +0200 Subject: [Buildroot] [PATCH 1/1] Preliminary support for Raspberry Pi 3 with symlink In-Reply-To: <81b71ac5323b1793405c3192b6ac5264@eja.it> References: <1461442370-22393-1-git-send-email-ubaldo@eja.it> <871t5triwb.fsf@dell.be.48ers.dk> <81b71ac5323b1793405c3192b6ac5264@eja.it> Message-ID: <20160425161610.4e5cbe87@armant.core.local.os.greenbone.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Mon, 25 Apr 2016 15:06:54 +0100 Ubaldo Porcheddu wrote: > Hi Peter, > > Il 2016-04-25 13:07 Peter Korsgaard ha scritto: > >>>>>> "Ubaldo" == Ubaldo Porcheddu writes: > > > > > Signed-off-by: Ubaldo Porcheddu > > > > Committed after expanding the commit message, thanks. > > > > I've also committed a change to sync the kernel version with what is > > used for rpi1/2 (E.G. the rpi-4.4.y branch). Care to verify that > > everything works correctly after that? > > I just tested the new kernel version but it doesn't give me the login > prompt, the kernel seems to be booting fine as it can recognize my > keyboard but it doesn't accept any input. > I had something similar, removed the 'console=ttyAMA0...' from the cmdline.txt file, and it booted through. Mine was not able to recognize my keyboard, but with dropbear and an extra user I was able to login. > > > What about the serial console? The rpi3 afaik uses ttyS0 instead of > > ttyAMA0 for the (default) serial console. Do we need to adjust > > cmdline.txt for the rpi? > > > > I see notes about newer rpi-firmware versions fixing up ttyAMA0 -> > > ttyS0 > > when running on a rpi3, so perhaps it isn't needed? > > > > https://github.com/RPi-Distro/repo/issues/22 > > I don't have a serial console cable to test with at the moment, but I > can see from the kernel log on screen a message like: > > console [ttyS0] enabled I see: 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 50000000) is a 16550 Please note that there is a line about tyAMA0 in the kernel boot logs as well: 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 Regards, Ben. > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 473 bytes Desc: OpenPGP digital signature URL: