From: andrew@lunn.ch (Andrew Lunn) Date: Sat, 16 Jul 2016 22:53:04 +0200 Subject: [PATCH v0 00/10] Convert Netgear WNR854T to devicetree In-Reply-To: <1468679348-10522-1-git-send-email-jm@lentin.co.uk> References: <1468679348-10522-1-git-send-email-jm@lentin.co.uk> Message-ID: <20160716205304.GA5075@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org > There's one major flaw; unicast traffic is never received on any port. > Broadcast traffic is received however, and on the correct port. Thus > an external machine can make an ARP request and get a response, for > example. With a manually-entered ARP entry, the router can send pings > out to a remote machine which responds, and the response is lost in the > DSA switch. "ethtool -S" reports pings received on "in_unicast" but > nothing makes it through the switch. This thread[0] seems very similar. > I've run out of ideas here and can't find any switch datasheets to give > me pointers so any suggestions greatly appreciated. Hi Jamie So it is 6131? So part of the 6185 family. I see you have NET_TAG_DSA, but not NET_TAG_EDSA in your configuration. Try swapping to EDSA. I even removed support for TAG_DSA in one of the recent patches. Please also can you get https://github.com/vivien/linux.git commit 323321875671dfe95b6b91ce051a74d415c7158c which will give you some extra debug files /sys/kernel/debug/mv88e6xxx. The reg, stats, and atu would be interesting. Andrew