From: Peter Seiderer Date: Mon, 15 Aug 2016 22:02:02 +0200 Subject: [Buildroot] [PATCH v1] raspberrypi3: fix serial console (add enable_uart=1) In-Reply-To: References: <1470953002-31897-1-git-send-email-ps.report@gmx.net> Message-ID: <20160815220202.486b6192@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Khem Raj, On Thu, 11 Aug 2016 21:14:59 -0700, Khem Raj wrote: > > > On Aug 11, 2016, at 3:03 PM, Peter Seiderer wrote: > > > > - enhance post-image.sh script to add 'enable_uart=1' to config.txt on request > > - add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-rpi3-config-enable-uart" in raspberrypi3_defconfig > > > > Signed-off-by: Peter Seiderer > > --- > > board/raspberrypi/post-image.sh | 13 +++++++++++++ > > board/raspberrypi/readme.txt | 6 +++++- > > configs/raspberrypi3_defconfig | 1 + > > 3 files changed, 19 insertions(+), 1 deletion(-) > > > > diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh > > index 73ffd65..3dc5902 100755 > > --- a/board/raspberrypi/post-image.sh > > +++ b/board/raspberrypi/post-image.sh > > @@ -5,6 +5,19 @@ BOARD_NAME="$(basename ${BOARD_DIR})" > > GENIMAGE_CFG="${BOARD_DIR}/genimage-${BOARD_NAME}.cfg" > > GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" > > > > +case "${2}" in > > + --add-rpi3-config-enable-uart) > > + if ! grep -qE 'enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then > > + echo "Adding 'enable_uart=1' to config.txt." > > + cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt" > > + > > +# fixes rpi3 console > > +enable_uart=1 > > +__EOF__ > > + fi > > + ;; > > +esac > > + > > # Mark the kernel as DT-enabled > > mkdir -p "${BINARIES_DIR}/kernel-marked" > > ${HOST_DIR}/usr/bin/mkknlimg "${BINARIES_DIR}/zImage" \ > > diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt > > index a170f8f..d101816 100644 > > --- a/board/raspberrypi/readme.txt > > +++ b/board/raspberrypi/readme.txt > > @@ -58,7 +58,7 @@ After building, you should obtain this tree: > > +-- rpi-firmware/ > > | +-- bootcode.bin > > | +-- cmdline.txt > > - | +-- config.txt > > + | +-- config.txt [3] > > | +-- fixup.dat > > | `-- start.elf > > +-- sdcard.img > > @@ -69,6 +69,10 @@ After building, you should obtain this tree: > > > > [2] This is the mkknlimg DT-marked kernel. > > > > +[3] For Pi 3 an additional 'enable_uart=1' will be added to fix > > + (serial) console output. Alternatives are 'dtoverlay=pi3-miniuart-bt' > > + or 'dtoverlay=pi3-disable-bt'. > > + > > How to write the SD card > > ======================== > > > > diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig > > index 4eb5333..62f47da 100644 > > --- a/configs/raspberrypi3_defconfig > > +++ b/configs/raspberrypi3_defconfig > > @@ -34,3 +34,4 @@ BR2_TARGET_ROOTFS_EXT2_4=y > > # BR2_TARGET_ROOTFS_TAR is not set > > BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh" > > BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh" > > +BR2_ROOTFS_POST_SCRIPT_ARGS="--add-rpi3-config-enable-uart? > > This lowers the core clock speed to minimum, so if you are doing some high > definition video decode or interlace then you might want this disabled. > I would recommend keeping it disabled by default. Is this (maybe) a vote for my initial proposed patch ([1]) to add dtoverlay=pi3-miniuart-bt? The current situation for Pi 3 (no dtoerlay, no enable_uart) is no serial console and an unusable default console on HDMI (with a doubled (but unusable) login prompt)... Regards, Peter > > > -- > > 2.8.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at busybox.net > > http://lists.busybox.net/mailman/listinfo/buildroot >