From: Lukasz Majewski Date: Fri, 17 Mar 2017 09:36:49 +0100 Subject: [U-Boot] [PATCH] ARM: am43xx: fix SOC revision print outs In-Reply-To: <1489650534-6613-1-git-send-email-t-kristo@ti.com> References: <1489650534-6613-1-git-send-email-t-kristo@ti.com> Message-ID: <20170317093649.0f6f7554@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 16 Mar 2017 09:48:54 +0200 Tero Kristo wrote: > Currently, AM43xx just re-uses the version strings from AM33xx which > is wrong; the actual values for AM43xx are different. Fix this by > adding a separate version string array for AM43xx and use this > instead. > > Signed-off-by: Tero Kristo > Reported-by: Sekhar Nori > --- > arch/arm/mach-omap2/am33xx/sys_info.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/am33xx/sys_info.c > b/arch/arm/mach-omap2/am33xx/sys_info.c index f0f72fa..e4fc461 100644 > --- a/arch/arm/mach-omap2/am33xx/sys_info.c > +++ b/arch/arm/mach-omap2/am33xx/sys_info.c > @@ -74,6 +74,10 @@ static char *cpu_revs[] = { > "2.0", > "2.1"}; > > +static char *cpu_revs_am43xx[] = { > + "1.0", > + "1.1", > + "1.2"}; > > static char *dev_types[] = { > "TST", > @@ -87,6 +91,7 @@ static char *dev_types[] = { > int print_cpuinfo(void) > { > char *cpu_s, *sec_s, *rev_s; > + char **cpu_rev_arr = cpu_revs; > > switch (get_cpu_type()) { > case AM335X: > @@ -97,6 +102,7 @@ int print_cpuinfo(void) > break; > case AM437X: > cpu_s = "AM437X"; > + cpu_rev_arr = cpu_revs_am43xx; > break; > default: > cpu_s = "Unknown CPU type"; > @@ -104,7 +110,7 @@ int print_cpuinfo(void) > } > > if (get_cpu_rev() < ARRAY_SIZE(cpu_revs)) > - rev_s = cpu_revs[get_cpu_rev()]; > + rev_s = cpu_rev_arr[get_cpu_rev()]; > else > rev_s = "?"; > Reviewed-by: Lukasz Majewski Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de