From: kishon@ti.com (Kishon Vijay Abraham I) Date: Fri, 19 May 2017 13:45:20 +0530 Subject: [PATCH 20/41] ARM: dts: dra7-evm: Correct the vmmc-supply for mmc2 In-Reply-To: <20170519081541.26753-1-kishon@ti.com> References: <20170519081541.26753-1-kishon@ti.com> Message-ID: <20170519081541.26753-21-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Ravikumar Kattekola On DRA75x EVM, MMC2 vdd/ios are connected to a common supply fixed at 1.8V not 3.3V Fixes: 6cf02dbb4b71 ("ARM: dts: dra7-evm: Add mmc2 node for eMMC support") Signed-off-by: Ravikumar Kattekola Signed-off-by: Sekhar Nori Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/dra7-evm.dts | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4bc4b575c99b..fbcb3199defd 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -25,6 +25,14 @@ stdout-path = &uart1; }; + evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + vin-supply = <&smps9_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -449,7 +457,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; - vmmc-supply = <&evm_3v3_sw>; + vmmc-supply = <&evm_1v8_sw>; bus-width = <8>; }; -- 2.11.0