From: horms@verge.net.au (Simon Horman) Date: Mon, 18 Sep 2017 10:13:38 +0200 Subject: [PATCH v2 7/8] arm64: dts: renesas: initial Eagle board device tree In-Reply-To: <20170915194445.950496886@cogentembedded.com> References: <20170915194445.950496886@cogentembedded.com> Message-ID: <20170918081338.GD4644@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Sep 15, 2017 at 10:43:25PM +0300, Sergei Shtylyov wrote: > Add the initial device tree for the R8A77970 SoC based Eagle board. > The board has 1 debug serial port (SCIF0); include support for it, > so that the serial console can work. > > Based on the original (and large) patch by Vladimir Barinov > . > > Signed-off-by: Vladimir Barinov > Signed-off-by: Sergei Shtylyov > > --- > arch/arm64/boot/dts/renesas/Makefile | 1 > arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 45 +++++++++++++++++++++++++ > 2 files changed, 46 insertions(+) > > Index: renesas/arch/arm64/boot/dts/renesas/Makefile > =================================================================== > --- renesas.orig/arch/arm64/boot/dts/renesas/Makefile > +++ renesas/arch/arm64/boot/dts/renesas/Makefile > @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-sa > dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb > dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb > dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb > +dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb > dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb Please consider submitting a patch to enable CONFIG_ARCH_R8A77970 in the ARM64 defconfig.