From: horms@verge.net.au (Simon Horman) Date: Thu, 21 Sep 2017 11:03:32 +0200 Subject: [PATCH 4/8] ARM: dts: iwg22d: Enable SDHI0 controller In-Reply-To: References: <1505322341-9480-1-git-send-email-chris.paterson2@renesas.com> <1505322341-9480-5-git-send-email-chris.paterson2@renesas.com> <20170921083839.GH15749@verge.net.au> <20170921084219.GK15749@verge.net.au> Message-ID: <20170921090332.GS15749@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Sep 21, 2017 at 08:53:00AM +0000, Fabrizio Castro wrote: > Hello Simon, > > > -----Original Message----- > > From: Simon Horman [mailto:horms at verge.net.au] > > Sent: 21 September 2017 09:42 > > To: Geert Uytterhoeven > > Cc: Chris Paterson ; Rob Herring ; Mark Rutland ; > > Magnus Damm ; Russell King ; Fabrizio Castro > > ; devicetree at vger.kernel.org; Linux-Renesas ; linux-arm- > > kernel at lists.infradead.org > > Subject: Re: [PATCH 4/8] ARM: dts: iwg22d: Enable SDHI0 controller > > > > On Thu, Sep 21, 2017 at 10:38:40AM +0200, Simon Horman wrote: > > > On Wed, Sep 20, 2017 at 01:40:20PM +0200, Geert Uytterhoeven wrote: > > > > On Wed, Sep 13, 2017 at 7:05 PM, Chris Paterson > > > > wrote: > > > > > From: Fabrizio Castro > > > > > > > > > > Enable the SDHI0 controller on iWave RZ/G1E carrier board. > > > > > > > > > > Signed-off-by: Fabrizio Castro > > > > > Signed-off-by: Chris Paterson > > > > > > > > Reviewed-by: Geert Uytterhoeven > > > > > > Thanks, applied. > > > > Sorry, I somehow overlooked Fabrizio's comments. > > I have dropped this patch for now. > > Thank you for doing this. > We are working on a new patch now, I'll submit a V2 as soon as it is ready. > Just to recap (all in one place), we found an HW issue and a SW one preventing SDHI0 from working properly at UHS SDR50 and SDR104, therefore we need a new patch to limit the speed of this interface. Thanks for catching this, UHS can be quite troublesome in my experience.