From: linux@roeck-us.net (Guenter Roeck) Date: Sun, 22 Oct 2017 10:31:18 -0700 Subject: [5/5,v2] watchdog: ftwdt010: Add restart support In-Reply-To: <20171016205427.4297-5-linus.walleij@linaro.org> References: <20171016205427.4297-5-linus.walleij@linaro.org> Message-ID: <20171022173118.GA17800@roeck-us.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Oct 16, 2017 at 10:54:27PM +0200, Linus Walleij wrote: > This enables the Faraday FTWDT010 to restart the system, > if need be. Set the restart priority for the watchdog to > 128. > > Signed-off-by: Linus Walleij Reviewed-by: Guenter Roeck > --- > ChangeLog v1->v2: > - Rebased, no changes. > --- > drivers/watchdog/ftwdt010_wdt.c | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c > index 21c3ac7f557a..0be7c2db642d 100644 > --- a/drivers/watchdog/ftwdt010_wdt.c > +++ b/drivers/watchdog/ftwdt010_wdt.c > @@ -56,6 +56,22 @@ struct ftwdt010_wdt *to_ftwdt010_wdt(struct watchdog_device *wdd) > return container_of(wdd, struct ftwdt010_wdt, wdd); > } > > +static int ftwdt010_wdt_restart(struct watchdog_device *wdd, > + unsigned long action, void *data) > +{ > + struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd); > + u32 enable; > + > + writel(1, gwdt->base + FTWDT010_WDLOAD); > + writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART); > + enable = WDCR_SYS_RST | WDCR_ENABLE; > + if (gwdt->use_extclk) > + enable |= WDCR_EXTCLK; > + writel(enable, gwdt->base + FTWDT010_WDCR); > + > + return 0; > +} > + > static int ftwdt010_wdt_start(struct watchdog_device *wdd) > { > struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd); > @@ -118,6 +134,7 @@ static const struct watchdog_ops ftwdt010_wdt_ops = { > .stop = ftwdt010_wdt_stop, > .ping = ftwdt010_wdt_ping, > .set_timeout = ftwdt010_wdt_set_timeout, > + .restart = ftwdt010_wdt_restart, > .owner = THIS_MODULE, > }; > > @@ -190,6 +207,7 @@ static int ftwdt010_wdt_probe(struct platform_device *pdev) > */ > gwdt->wdd.timeout = 13U; > watchdog_init_timeout(&gwdt->wdd, 0, dev); > + watchdog_set_restart_priority(&gwdt->wdd, 128); > > reg = readw(gwdt->base + FTWDT010_WDCR); > if (reg & WDCR_ENABLE) {