From: andy.tang at nxp.com Date: Thu, 26 Oct 2017 17:28:04 +0800 Subject: [U-Boot] [PATCH 2/2] armv8: ls1088a: Add SCSI command support In-Reply-To: <20171026092804.4834-1-andy.tang@nxp.com> References: <20171026092804.4834-1-andy.tang@nxp.com> Message-ID: <20171026092804.4834-2-andy.tang@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Yuantian Tang SATA feature was supported on ls1088a, so add SCSI command to operate sata. Signed-off-by: Tang Yuantian --- configs/ls1088aqds_qspi_defconfig | 1 + configs/ls1088ardb_qspi_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index 6a542ed5f8..6a4ae491c7 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -15,6 +15,7 @@ CONFIG_CMD_SF=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_CMD_SCSI=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 52b10af96a..4ed221ea68 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -15,6 +15,7 @@ CONFIG_CMD_SF=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_CMD_SCSI=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y -- 2.14.1