From: Tom Rini Date: Tue, 21 Nov 2017 07:44:19 -0500 Subject: [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor In-Reply-To: <1510656153-26769-2-git-send-email-faiz_abbas@ti.com> References: <1510656153-26769-2-git-send-email-faiz_abbas@ti.com> Message-ID: <20171121124419.GA2087@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Nov 14, 2017 at 04:12:31PM +0530, Faiz Abbas wrote: > The dra7xx series of SOCs contain a temperature sensor and an > associated analog-to-digital converter (ADC) which produces > an output which is proportional to the SOC temperature. > Add support for this temperature sensor. > > Signed-off-by: Faiz Abbas > Reviewed-by: Simon Glass > --- > > v5: > Added terminator brackets ({}) to ti_bandgap_match[] > > v3: > Added Reviewed-by comment > > v2: > 1. Removed extra elements from ti_bandgap > 2. Changed base address to ulong > 3. Changed to udev to dev to maintain consistency > 4. minor format changes > > common/spl/Kconfig | 8 + > .../thermal/ti_soc_thermal.txt | 35 ++++ > drivers/Makefile | 1 + > drivers/thermal/Kconfig | 6 + > drivers/thermal/Makefile | 1 + > drivers/thermal/ti-bandgap.c | 198 +++++++++++++++++++++ > 6 files changed, 249 insertions(+) > create mode 100644 doc/device-tree-bindings/thermal/ti_soc_thermal.txt > create mode 100644 drivers/thermal/ti-bandgap.c > This fails to build on am57xx_evm_nodt. Lokesh, does it still make sense to have that defconfig? If so, we need to disable this feature on that config, or we need to delete that config then apply this series. Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: