Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:35010 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1424492AbeBOPpe (ORCPT ); Thu, 15 Feb 2018 10:45:34 -0500 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Hans Verkuil , Rob Herring , Mauro Carvalho Chehab Subject: [PATCH 4.15 152/202] media: dt-bindings/media/cec-gpio.txt: mention the CEC/HPD max voltages Date: Thu, 15 Feb 2018 16:17:32 +0100 Message-Id: <20180215151720.914665776@linuxfoundation.org> In-Reply-To: <20180215151712.768794354@linuxfoundation.org> References: <20180215151712.768794354@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Hans Verkuil commit dac15ed62dc9d7898d3695a3c393d6f712d66185 upstream. Mention the maximum voltages of the CEC and HPD lines. Since in the example these lines are connected to a Raspberry Pi and the Rpi GPIO lines are 3.3V it is a good idea to warn against directly connecting the HPD to the Raspberry Pi's GPIO line. Signed-off-by: Hans Verkuil Reviewed-by: Rob Herring Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/media/cec-gpio.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/Documentation/devicetree/bindings/media/cec-gpio.txt +++ b/Documentation/devicetree/bindings/media/cec-gpio.txt @@ -4,6 +4,10 @@ The HDMI CEC GPIO module supports CEC im is hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up to another GPIO line. +Please note: the maximum voltage for the CEC line is 3.63V, for the HPD +line it is 5.3V. So you may need some sort of level conversion circuitry +when connecting them to a GPIO line. + Required properties: - compatible: value must be "cec-gpio". - cec-gpios: gpio that the CEC line is connected to. The line should be @@ -21,7 +25,7 @@ the following property is optional: Example for the Raspberry Pi 3 where the CEC line is connected to pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is -connected to pin 11 aka BCM17: +connected to pin 11 aka BCM17 (some level shifter is needed for this!): #include