From: mort@bork.org (Martin Hicks) Date: Tue, 20 Feb 2018 13:01:23 -0500 Subject: [PATCH V2] tty: serial: imx: allow breaks to be received when using dma In-Reply-To: <20180209212240.14095-1-troy.kisky@boundarydevices.com> References: <20180209212240.14095-1-troy.kisky@boundarydevices.com> Message-ID: <20180220180123.GB7751@darwin.bork.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Feb 09, 2018 at 01:22:40PM -0800, Troy Kisky wrote: > This allows me to login after sending a break when service > serial-getty at ttymxc0.service is running > > Signed-off-by: Troy Kisky Tested-by: Martin Hicks Works for me. mh > > --- > v2: rebase only > > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c > index 1d7ca382bc12..2eb8c4a20d68 100644 > --- a/drivers/tty/serial/imx.c > +++ b/drivers/tty/serial/imx.c > @@ -927,7 +927,6 @@ static void dma_rx_callback(void *data) > status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state); > > if (status == DMA_ERROR) { > - dev_err(sport->port.dev, "DMA transaction error.\n"); > clear_rx_errors(sport); > return; > } > @@ -1028,6 +1027,7 @@ static int start_rx_dma(struct imx_port *sport) > > static void clear_rx_errors(struct imx_port *sport) > { > + struct tty_port *port = &sport->port.state->port; > unsigned int status_usr1, status_usr2; > > status_usr1 = readl(sport->port.membase + USR1); > @@ -1036,12 +1036,18 @@ static void clear_rx_errors(struct imx_port *sport) > if (status_usr2 & USR2_BRCD) { > sport->port.icount.brk++; > writel(USR2_BRCD, sport->port.membase + USR2); > - } else if (status_usr1 & USR1_FRAMERR) { > - sport->port.icount.frame++; > - writel(USR1_FRAMERR, sport->port.membase + USR1); > - } else if (status_usr1 & USR1_PARITYERR) { > - sport->port.icount.parity++; > - writel(USR1_PARITYERR, sport->port.membase + USR1); > + if (tty_insert_flip_char(port, 0, TTY_BREAK) == 0) > + sport->port.icount.buf_overrun++; > + tty_flip_buffer_push(port); > + } else { > + dev_err(sport->port.dev, "DMA transaction error.\n"); > + if (status_usr1 & USR1_FRAMERR) { > + sport->port.icount.frame++; > + writel(USR1_FRAMERR, sport->port.membase + USR1); > + } else if (status_usr1 & USR1_PARITYERR) { > + sport->port.icount.parity++; > + writel(USR1_PARITYERR, sport->port.membase + USR1); > + } > } > > if (status_usr2 & USR2_ORE) { > -- > 2.14.1 > -- Martin Hicks P.Eng. | mort at bork.org Bork Consulting Inc. | +1 (613) 266-2296