From: stefan@agner.ch (Stefan Agner) Date: Tue, 27 Feb 2018 17:05:44 +0100 Subject: [PATCH 2/2] ARM: dts: imx7s: add Keypad Port module In-Reply-To: <20180227160544.11446-1-stefan@agner.ch> References: <20180227160544.11446-1-stefan@agner.ch> Message-ID: <20180227160544.11446-2-stefan@agner.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add the Keypad Port module. Add it disabled by default since only some boards use it. Boards which do need to specify additional properties as documented in the device tree bindings. Signed-off-by: Stefan Agner --- arch/arm/boot/dts/imx7s.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 097b066ed23c..46400ba2217a 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -499,6 +499,14 @@ status = "disabled"; }; + kpp: kpp at 30320000 { + compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; + reg = <0x30320000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_KPP_ROOT_CLK>; + status = "disabled"; + }; + iomuxc: iomuxc at 30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>; -- 2.16.2